Tessera.

Made for 3D printing

Prints on your printer. Snaps into place.

Every 3D kit comes with the TesseraGrid system, a backing split to fit your print bed, and a fit test that tunes how snugly the pieces click in on your machine.

01

The TesseraGrid system

Every piece drops into its own 1.6 mm pocket on a 5 mm alignment peg, so the whole design lines up perfectly with no glue and no measuring. The TesseraGrid system is included in every 3D kit.

  • · Pieces pop in, and out again if you want to change a color
  • · Plates join with printed bow-tie keys
  • · Hang with screws hidden under pieces, adhesive pads, or both
pocketpegyour fitTesseraGrid plate · 5 mm
A1A2A3A4B1B2B3B4C1C2C3C4D1D2D3D4
16 plates · 180 mm bed (A1 mini)
A1A2A3B1B2B3C1C2C3
9 plates · 256 mm bed (Bambu A1 / P1 / X1)

02

Sized to your print bed

Choose your printer and the TesseraGrid is split into as few plates as possible that each fit your bed. A big piece is no problem. Here's the same 24 in round design on two printers.

Bambu A1 mini · 180 mmEnder 3 · 220 mmPrusa MK4 · 210 mmBambu A1 · 256 mmCreality K1 Max · 300 mmor any size

03

A fit test for your printer

Every printer and filament is a little different. After you buy, print a small test plate with 8 numbered pockets from snug (0.05 mm) to loose (0.40 mm). Push a test piece into each, pick the one that clicks in just right, and every download from then on uses your fit.

  1. 1. Download the fit test from your orders page
  2. 2. Print it with your usual filament and settings
  3. 3. Choose the number that fits best and download your kit
12345678

04

Print-ready files

Numbered parts

Every piece has its number debossed underneath, and the assembly map shows exactly where it goes.

3MF with colors

Every file is a 3MF named with its color. In Bambu Studio, OrcaSlicer, Creality Print and Snapmaker Orca the whole piece opens with each color already on its own filament slot.

Sorted by color

Pieces come laid out on bed-sized plates, one file per filament color, so each print is a single color.

No supports

Leaning tips are kept within about 45°, so every piece prints upright without support material.

Filament estimates

The README lists grams per color and per TesseraGrid plate before you start.

Assembled 3MF preview

Open the whole piece, in color, in your slicer before printing a single part.

Wall-ready

Countersunk screw holes hidden under pieces, adhesive-pad recesses, or both. Plates join with bow-tie keys.

Your files, whenever you need them

Sign in with Google to find every order in one place. Download a kit again, switch printers, or re-tune your fit, and the files are rebuilt for you.